Framing 101 for ProShow Producer

The quick-and-dirty way to frame a photo is to add an outline. It’s nothing to write home about.

A less quick-and-dirty way is to duplicate the photo, zoom the underneath photo a little larger, set its contrast at 0%, and Colorize it. There’s more versatility in size and position with this method.

The least quick way is more elegant and uses masks to create a frame with interior shading for a realistic sense of depth. The magic is in Transparency Inverted masks.

A step-by-step example:

The Photo

Original Photo

Creating the Frame

1. Add the photo to a slide and set as “Fit to safe zone” to allow space for the frame around it.

2. Duplicate the photo 4 times for a total of 5 layers.

3. Set layer 1 to a Transparency Inverted mask.

4. Select layer 2, set Zoom to 103%.

5. In the Adjustments tab, set layer 2’s Contrast to 0% and Colorize it.

Showing only layers 1 and 2, here’s the result…

Frame Bare

6. Select layer 3 and Zoom it to 101%.

7. Turn layer 3 into a Transparency Inverted mask.

8. In the Adjustments tab, add a Vignette with a size of 7 to layer 3.

9. Select layer 4, and in the Adjustments tab, set the White Point to 0%, turning it black.

10. Set layer 4’s opacity to about 55%, turning it into a shadow.

Showing layers 1 through 4…

Frame-Shading

And with layer 5, the photo layer, included…

Frame & Photo

If you follow the instructions, you can gain an understanding of how inverted masks operate. However, if it’s just too much fussing around and you prefer getting on with life, download the free Framing 101 slide style from The Frame Locker to keep handy for whenever you need a nicely framed photo.

Advertisements

4 Comments

  1. Thanks Barbara, this will come in handy.

    • You’re more than welcome. The style works well as a prototype so you don’t have to reinvent the wheel whenever you create a frame. Play with it a bit to see how you might vary it.

  2. Love these tips and easy to understand steps. Thank you


Comments are closed.